Under-sink reverse osmosis
Will an RO system fit under my sink?
Measure the cabinet, check the faucet opening, compare published dimensions, and check plumbing and power requirements before ordering.
Check your cabinetThis tool covers the three RO systems in our original comparison. For the two Claryum carbon systems, use their installation requirements and model manuals.
Start with what’s under the sink
HealthShield specifications checked . Other model data retains the November 15 source snapshot.
- Measure each usable space. Record front-to-back depth, side-to-side width and height below the bowl. Check the door opening and obstructions such as the disposal, trap, valves and pull-out bins. A tank may need its own separate spot.
- Leave access for service. Check tubing bends and travel to remove filters. Waterdrop’s front filters need straight-out access and its manual advises keeping the tower off the cabinet wall. HealthShield needs access to pull out and replace its two cartridges. APEC needs room to remove its vertical filter housings and reach the tank valve. The dimensions below describe the equipment. Ask the manufacturer or installer to confirm service space for your proposed orientation, including fittings.
- Check the cold-water feed and drain. All three use a cold feed and a reject-water path to a drain. Check for a reachable shutoff and confirm feed pressure, thread compatibility, drain access and local air-gap or backflow requirements with an installer.
- Look for a dedicated faucet opening. A compatible unused accessory opening may avoid countertop drilling. Measure above and below the opening and check the faucet’s secure mounting and tubing. HealthShield’s supplied faucet needs an opening at least 7/8 in. across. Follow model-specific drain and air-gap requirements. G3P800 includes a wired smart faucet. Verify before planning to reuse an older faucet.
- Check power for HealthShield and G3P800. HealthShield requires continuous 120 V power within six feet. G3P800 also requires power. ROES-50 uses feed pressure and a separate tank. Ask a qualified electrician about a safe receptacle if the only outlet is switched or inaccessible.
Get permission before modifying a rental. For stone drilling, new electrical work, uncertain plumbing or local air-gap requirements, get a qualified installer’s assessment before ordering.
Compare a clear cabinet space
Enter the clear depth, width and height for one part at a time.
Passing this check does not guarantee installation compatibility. The tool compares one part’s published dimensions in the orientation shown. Before ordering, check the door opening and obstructions, room for all parts and filter changes, mounting, tubing and fittings, cold-water feed, drain and air gap, faucet, and power where needed. Follow the exact model’s instructions and ask a qualified installer if any requirement is uncertain.
Equipment length is aligned with cabinet depth. An exact match leaves zero clearance on that axis.
Tank or tankless?
HealthShield and G3P800 use powered tankless bodies. ROES-50 needs room for its filter assembly and tank. Each needs suitable plumbing, a dedicated faucet and service access. Read HealthShield’s pressure and performance qualifications.
Check the current HealthShield offer
Independent editorial site. We may earn a commission if you buy through an Aquasana offer button. Waterdrop and APEC links are ordinary links. Our comparisons use published sources; we have conducted no hands-on testing.
Sources
- Aquasana HealthShield AQ-HSRO800-BN specifications and price
- HealthShield owner’s manual
- HealthShield performance data sheet
- HealthShield limited warranty
- HealthShield CPP replacement price
- HealthShield RO membrane replacement price
- Waterdrop G3P800 manual, manufacturer document via Home Depot
- Waterdrop G3P800 specifications and price
- APEC ROES-50 product and specifications